Apex Digital DRX-9000 Provozní pokyny Strana 39

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 41
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 38
Check the following guide for a possible correction to a problem
before Contacting customer _twlce,
_'d1,_1a I[=]1,_F.11r;_lilm|n(o] :t r,l=[q | lo];
Symptom Correction
No power * Connect the power plug intothe _il ou_Jetsecurely.
NOpicture * Verify the connection from the DVD video output to the q_ video input.Then switch_,] to
appropriatemode (video 1)
Connect the video cable into the jacks securely. Refer to your television owners manual
No sound * Connect the audio cables into the jacks securely.
Verify the connection from the DVD audio output to the TV or receiver audio input Then switch
to the appropriate source on the receiver. Refer to your audio amplifier owners manual.
Black & White * Damaged S connector (bent pin)
picture
The playback *A small amount of picture distortion may appearbecause of a poor quality video/sound transfer
piclure has to disc This is esbecially true of some discs manufactured between 1997-1998.
occasional distortion * Scratched disc
Brightness is * Connect the DVD player directly through the _/and notthrough any other source What you're
"unstableor noises viewing is the effect of the copy protection circuit_ required on all DVD players.
are produced on
playback pictures
The DVD video * Place the disc with the graphics side up
player does not start , Place the disc on the disc tray correctly inside the guide.
playback * Make sure the disc is free from scratches & fingerprints.
Press the SETUPbutfen to turn off the menu screen.
Cancel theparental lock function or change the parental lock level(The Preset pass_orcl is
33_)
Turn the power off then disconnect the power ptug and reinsert it back into the wall Rat_ again.
Use region I discs only.
MP3 won't read disc * Redum disc as the software edition used may not be compatible with the player. Check web
or it skips sitefor instruc'JJon.
Use new editions of software such as Voyatra AudiostetJon 4, Adaptec's "Easy CD Creator"
NTI or Roxio'sToaat 3itenium
Make sure MP3 file are not encoded with a variable bit rate such as provided by Real Networks
The remote control Replace the batteries _t4thnew ones.
does not work
properly
The recorder cannot • The type of the disc is wrong, it's not a DVD+RW or DVD+R disc
record. The disc is recorded full
The disc (DVD+R, DVD+RW) is locked, it should be unlocked.
The DVD+R has been finilized
Some keys do not The type of the disc is wrong, it'snot a DVD+RW or DVD+R disc.
work The unit is in record mode or it is recording.
The image is • The setup of Ioteriaced or Progressive is wrong.
distorted. Press the IlPbutfen to switch from each other.
38
Zobrazit stránku 38
1 2 ... 34 35 36 37 38 39 40 41

Komentáře k této Příručce

Žádné komentáře